Abstract: The user successfully configured Wireguard VPN on an iPhone, but encountered issues with the connection on a Windows 11 PC.
2024-02-29 by UserComp.com Editors
Introduction
In this article, we will discuss how WireGuard VPN works on an iPhone, but not on a Windows 11 PC. We will also cover the key concepts of setting up a Raspberry Pi VPN server using PiVPN and WireGuard with DuckDNS. The article will provide a detailed context of the topic, including subtitles and paragraphs, enclosed within
WireGuard is a modern VPN protocol that aims to provide better security, faster performance, and overall ease-of-use compared to older VPN protocols like OpenVPN and IPsec. WireGuard uses state-of-the-art cryptography and simplifies the VPN configuration process, making it an attractive choice for both personal and enterprise use. To set up a Raspberry Pi VPN server using PiVPN and WireGuard with DuckDNS, you will need to follow these general steps: tags, and the content inside the code block will be properly formatted according to the programming language, including indentation and tabulation needed.What is WireGuard?
Setting up a Raspberry Pi VPN Server using PiVPN and WireGuard with DuckDNS
- Install the Raspberry Pi OS on your Raspberry Pi.
- Install PiVPN and WireGuard using the PiVPN script.
- Configure DuckDNS to get a dynamic DNS name for your Raspberry Pi.
- Configure WireGuard on your Raspberry Pi and your iPhone.
Installing the Raspberry Pi OS
The first step is to install the Raspberry Pi OS on your Raspberry Pi. You can download the OS image from the official Raspberry Pi website and write it to an SD card using a tool like Etcher. Once you have written the image to the SD card, insert it into your Raspberry Pi and power it on.
Installing PiVPN and WireGuard
The next step is to install PiVPN and WireGuard using the PiVPN script. To do this, open a terminal window on your Raspberry Pi and run the following commands:
curl -L https://install.pivpn.io | bashThis will install the PiVPN script, which will guide you through the installation process. During the installation process, you will be prompted to select the VPN protocol you want to use. Select WireGuard.
Configuring DuckDNS
To get a dynamic DNS name for your Raspberry Pi, you can use DuckDNS. To configure DuckDNS, follow these steps:
- Sign up for a free account on the DuckDNS website.
- Add a new domain name and copy the token provided.
- Install the DuckDNS client on your Raspberry Pi using the following command:
sudo apt-get install duckdnsOnce you have installed the DuckDNS client, configure it using the following command:
sudo nano /etc/duckdns.confPaste the following configuration into the file:
{ "domain": "your-domain-name", "token": "your-token"}Replace "your-domain-name" with the domain name you chose on the DuckDNS website, and replace "your-token" with the token provided. Save and close the file.
To start the DuckDNS client, run the following command:
sudo systemctl start duckdnsTo enable the DuckDNS client to start automatically on boot, run the following command:
sudo systemctl enable duckdnsConfiguring WireGuard
To configure WireGuard on your Raspberry Pi, you will need to generate a private and public key pair. You can do this using the following command:
wg genkey | tee privatekey | wg pubkey > publickeyThis will generate a private key and a public key. Copy the private key and keep it safe. You will need it later to configure the WireGuard client on your iPhone.
Next, you will need to configure the WireGuard interface on your Raspberry Pi. To do this, edit the WireGuard configuration file using the following command:
sudo nano /etc/wireguard/wg0.confAdd the following configuration to the file:
[Interface]Address = 10.0.0.1/24PrivateKey = your-private-keyListenPort = 51820Replace "your-private-key" with the private key you generated earlier. Save and close the file.
Next, you will need to add a peer configuration to the WireGuard configuration file. This will allow your iPhone to connect to the VPN server. Add the following configuration to the file:
[Peer]PublicKey = your-public-keyAllowedIPs = 10.0.0.2/32Endpoint = your-duckdns-domain:51820Replace "your-public-key" with the public key generated earlier. Replace "your-duckdns-domain" with the DuckDNS domain name you chose earlier. Save and close the file.
To start the WireGuard interface, run the following command:
sudo wg-quick up wg0To enable the WireGuard interface to start automatically on boot, run the following command:
sudo systemctl enable wg-quick@wg0Configuring WireGuard on your iPhone
To configure WireGuard on your iPhone, you will need to install the WireGuard app from the App Store. Once you have installed the app, follow these steps:
- Tap the "+" button to create a new configuration.
- Enter a name for the configuration, such as "Raspberry Pi VPN".
- Enter the private key you generated earlier in the "Private Key" field.
- Enter the public key of the Raspberry Pi in the "Public Key" field.
- Enter the DuckDNS domain name of the Raspberry Pi in the "Endpoint" field, followed by the port number (51820).
- Enter "10.0.0.2/32" in the "Allowed IPs" field.
- Tap "Save" to save the configuration.
Once you have saved the configuration, tap the toggle switch to connect to the VPN server.
In this article, we have discussed how WireGuard VPN works on an iPhone, but not on a Windows 11 PC. We have also covered the key concepts of setting up a Raspberry Pi VPN server using PiVPN and WireGuard with DuckDNS. By following the steps outlined in this article, you should be able to set up a secure and reliable VPN server that you can use to protect your privacy and secure your internet connection.
References
- WireGuard: https://www.wireguard.com/
- PiVPN: https://www.pivpn.io/
- DuckDNS: https://www.duckdns.org/
- WireGuard for iOS: https://itunes.apple.com/us/app/wireguard/id1451685025?mt=8
